Unit LoRaE220
Description
The LoRaE220 Unit is a LoRa communication module introduced by M5Stack, designed for the 920MHz frequency band. It utilizes convenient serial communication. It supports point-to-point transmission and broadcast modes, as well as wireless wake-up, carrier monitoring, and communication key features. It can switch between four different operating modes using onboard dip switches, allowing for configuration of data transmission and reception functions, catering to various communication needs. It is suitable for applications in home security alarms, building automation, smart homes, and the automotive industry, among others.
Features
- Rich communication functions: support Wake on Radio (wireless wake up), carrier monitoring, communication key and other functions.
- Onboard DIP switch: Toggle the switch to configure the working mode and configure the data sending and receiving functions.
- Communication frequency band: Supports the 920MHz band(920.6〜928.0MHz).
- High performance: A new generation of LoRa solutions with longer transmission distances, faster speeds and lower power consumption.
- Serial communication: Supports serial communication to provide a high degree of flexibility and reliability for iot applications.
Includes
- 1 x LoRaE220 Unit
- 1x Grove Cable (20cm)
Applications
- Agriculture, industrial automation
- Home security
- Automotive industries
Specification
| Resources | Parameters |
|---|---|
| Lora Module | E220-900T22S(JP) @ Telec(001-P01730) |
| Module Chip | LLCC68 |
| Support band | 920MHz(920.6〜928.0MHz) |
| Maximum transmitting power | 13dBm（About20mW） |
| Communication distance | The communication distance is up to 5 km |
| Service voltage | 5V |
| Communication mode | Serial port communication |
| Product Size | 71.4*24*8mm |
| Package Size | 136*92*13mm |
| Product Weight | 19.5g |
| Package Weight | 25.1g |
Related Link
Schematic
PinMap
LoRaE220-JP Working Mode
| WORKING MODE(0-3) | M0, M1 | Description |
|---|---|---|
| 0:Transmission Mode | M0:ON, M1:ON | Normal data packet sending and receiving mode |
| 1:WOR Sending Mode | M0:ON, M1:OFF | Send WOR data packets, this mode also supports data receiving |
| 2:WOR Receiving Mode | M0:OFF, M1:ON | Disable data transmission. This mode only supports WOR data packet receiving. |
| 3:Configuration Mode | M0:OFF, M1:OFF | Switch to configuration mode to configure the module's transmit power, channel, address, and other information |
PORT C
| UNIT-LoRaE220-JP | TXD | RXD | 5V | GND |
|---|---|---|---|---|
| M5Core(PORT C) | G16 | G17 | VCC | GND |
| M5Core2(PORT C) | G13 | G14 | VCC | GND |
| M5CoreS3(PORT C) | G18 | G17 | VCC | GND |
| M5CoreMP135(PORT C) | PH8 | PF11 | VCC | GND |
| M5ATOM Lite/ATOM Matrix | G32 | G26 | VCC | GND |
| M5ATOMS3/ATOMS3 Lite | G1 | G2 | VCC | GND |
| M5StickC/M5StickC plus/plus2 | G33 | G32 | VCC | GND |
Module Size
Examples
Arduino
UIFlow
How to use Unit lora_e220 and related API instructions in the UIFlow2.0
Video
- LoRaE220-JP Unit Demo and Introduction